Skip to content

12 Speed Road Ratchet

This ratchet allows you to pair 10 or 11 speed mechanical SRAM shifters and a 1x-specific SRAM Exact Actuation* derailleur with a 12 speed SRAM eTap* AXS* cassette and chain. You’ll gain all the advantages of greater gear range and closer gear ratios without the expense or weight of electronic shifting.

NOTE: You will need to replace your 11 speed jockey wheels with SRAM eTap* AXS*  compatible ones. We offer some in our 1×12 Road Upgrade kit.

View our Support page here. For more information, check our compatibility guide.

£69.83

SKU: 0014 Category:

The Ratio 12 Speed Road Ratchet allows you to operate a SRAM eTap AXS* 12 speed cassette and chain with your existing SRAM road 10 or 11 speed shifters and 1x-specific SRAM Exact Actuation* derailleur.

Using a 1×12 Road kit gives you following advantages:

  • Greater gear range and/or closer gear ratios than 11 speed
  • Lower cost than wireless electronic. Save $1800 on a SRAM Force* build; $800 saving on a SRAM Rival* build
  • Lower weight. Save 160g on a SRAM Force* build; 220g on a SRAM Rival* build
  • No batteries to keep charged
  • The reliability and serviceability of mechanical shifting
  • #humanpowered

In your kit you will find:

  1. Ratio 12 Speed Road ratchet, with shift spacing specially designed for SRAM AXS* 12 speed cassettes
  2. M2.5 screw for shifter ratchet replacement
  3. Ratio chainstay sticker

To use this ratchet you will need:

  1. SRAM 10 or 11 speed road shifters. If using 10 speed shifters you will also need a cable spool available separately here
  2. SRAM 1x derailleur from the Force 1*, Rival 1* or Apex 1* groups
  3. SRAM eTap AXS* compatible jockey wheels. We offer some in our  1×12 Road Upgrade kit
  4. A SRAM 12 speed eTap AXS* 12 speed cassette from the Red*, Force* or Rival* groups
  5. A SRAM 12 speed eTap AXS* 12 speed chain from the Red*, Force* or Rival* groups
  6. A chainring compatible with the 1×12 speed SRAM eTap AXS* groups
  7. An SRAM XDR* freehub.

All products we offer for sale on our website are Ratio Technology products unless stated otherwise. All third-party products, company names and logos remain the property of their respective holders and use of them does not imply any affiliation with or endorsement by them.

To fit your ratchet to SRAM shifters for hydraulic brakes, see the following video**:

 

To fit your ratchet to SRAM shifters for cable brakes, see the following video**:

NOTE: On some older shifters, the reach adjuster will not spin freely when it bottoms out. Stop turning the reach adjuster screw as soon as you encounter resistance.

* Ratio Technology Limited is not in any way affiliated with, sponsored or endorsed by SRAM, LLC.

AXS®, DoubleTap®, eTap®, SRAM®,SRAM APEX®, SRAM EAGLE®, SRAM FORCE®, SRAM RED®, SRAM RIVAL®, X0®, X01®, XX1® are registered trade marks owned by SRAM, LLC. Eagle™, Exact Actuation™, GX™, NX™, SRAM APEX 1™, SRAM Force 1™, SRAM RIVAL 1™, S-series™, SX™, WiFLi™, X-Actuation™,  XD™, XDR™, XPLR™, XX™, Zero Loss™ are trademarks of SRAM, LLC.

** Please note that modifying these components may void the original SRAM warranty.

Weight 100 g
Dimensions 17.5 × 11.2 × 2.2 cm
Packaging

To reduce waste we will send orders of over 10 units as bagged kits with one set of instructions rather than individual kit boxes. You can find a PDF of the instructions on our website here https://ratiotechnology.com/support/ . If you have ordered less than 10 kits but would also like to reduce the packaging of your bulk order or have any questions please email us at info@ratiotechnology.com. Equally if you would like the full packaging for orders of 10+ kits drop us a line too.

Large orders

If you wish to order more than 50 kits please contact us directly via info@ratiotechnology.com

HS Code

HS8714995099

Country of Origin

GB

Reviews

There are no reviews yet.

Be the first to review “12 Speed Road Ratchet”

Your email address will not be published. Required fields are marked *