Skip to content

1×12 Wide Ratchet and Cage Kit

£155.00

This kit is designed to allow 1×11 SRAM riders to upgrade to wide range 1×12 more easily than ever.

Pair this kit with your SRAM Force 1™, Rival 1™ or Apex 1™ mechanical shifters, derailleur and a wide range cassette with up to 52T for low cost mullet gearing for your gravel or road bike. If you’re not sure which kit or parts you need, please check our Kit Guide.

SKU: 0028 Category:

This cage & jockey wheel combination allows you to increase the capacity of your SRAM Force 1™, Rival 1™ or Apex 1™ mechanical rear derailleur in order to use it with a cassette with up to 52 teeth. The Ratio 1×12 Wide Ratchet converts your shifter to 12 speed to use with wide range cassettes.

In this kit you will find:

  • Ratio 1×12 Wide Ratchet
  • Garbaruk rear derailleur cage for SRAM 11/12-speed derailleurs
  • Two Ratio nylon jockey wheels (12T & 16T), running on high-quality stainless bearings
  • Ratchet replacement screw

To use this kit you will need:

  1. SRAM 11 or 10 speed shifters from the Red™, Force™, Rival™ or Apex™ groups
  2. SRAM Force 1™, Rival 1™ or Apex 1™ mechanical rear derailleur
  3. A compatible wide range 12 speed cassette
  4. A 12 speed chain for SRAM Eagle™ drivetrains
  5. A 1×12 compatible chainring
  6. A Ratio Cable Spool (necessary only for applicable 10 speed shifters – find out more)

 

To fit your ratchet to SRAM shifters for hydraulic brakes, see the following video*:

 

To fit your ratchet to SRAM shifters for cable brakes, see the following video*:

NOTE: On some older shifters, the reach adjuster will not spin freely when it bottoms out. Stop turning the reach adjuster screw as soon as you encounter resistance.

 

 

*Please note that modifying these components may void the original SRAM warranty. Ratio Technology Limited is in no way linked to SRAM LLC

Reviews

There are no reviews yet.

Be the first to review “1×12 Wide Ratchet and Cage Kit”

Your email address will not be published.