Skip to content

1×12 Wide Upgrade Kit – Rear Cable Exit

This upgrade kit allows you to pair 11 speed mechanical SRAM shifters with a 12 speed SRAM Eagle* derailleur and cassette. This is the neatest solution on the market, giving you all the performance advantages of a wide-range 1×12 drivetrain on a gravel, road or touring bike without the expense of electronic shifting.

Thanks to the rear-exit cable stop, this kit is compatible with all frame cable routing variations.

For more information on compatibility, check our guide.

COMPATIBLE: SRAM Eagle* derailleurs from the X01* or XX1* groups.

NOT COMPATIBLE: SRAM Eagle* derailleurs from the SX*, NX* and GX*  (the cable pulley is riveted in place).

View our Support and FAQs here

£99.23

SKU: 0002 Category:

As cyclists, we design the products we want on our bikes. The Ratio 12-Speed Upgrade Kit allows you to operate a SRAM Eagle* derailleur with your existing SRAM 11-speed shifters, gaining an unbeatable 500% or 520% range and 12 evenly spaced gears on your gravel, road or touring bike. For reference, a traditional 50/34 compact chainset with 11-28 cassette provides only 374% range.

In your kit you will find:

  1. Ratio 12-speed ratchet, with shift spacing specially designed for SRAM Eagle* derailleurs
  2. Ratio cable fin, replacing the existing cable fin on a SRAM Eagle* derailleur
  3. Ratio rear-facing cable stop with adjuster, routing the cable out of the back of the derailleur for compatibility with all frame designs
  4. Cable Stop fitting screw
  5. Spare cable fin circlip
  6. M2.5 screw for shifter ratchet replacement
  7. Ratio chainstay sticker

To use this kit you will need:

  1. SRAM 11-speed shifters from the Red*, Force*, Rival* or Apex* groups or the 10-speed S-700* shifters.
  2. A SRAM Eagle* derailleur from the XX1* or X01* groups. GX* derailleurs are NOT COMPATIBLE with the cable stop as the cable pulley is riveted in place – you can find a pre-fitted SRAM GX* derailleur in our 1×12 Wide Upgrade Kit + Rear Exit SRAM GX* Derailleur. The kit is NOT COMPATIBLE with SX* and NX* derailleurs as the cable fins on these derailleurs are riveted in place.
  3. A SRAM Eagle* 12 speed cassette. We can’t confirm that aftermarket cassettes will perform properly with your drivetrain.
  4. A 12 speed chain for SRAM Eagle* drivetrains.
  5. A 1×12 speed compatible chainring.

All products we offer for sale on our website are Ratio Technology products unless stated otherwise. All third-party products, company names and logos remain the property of their respective holders and use of them does not imply any affiliation with or endorsement by them.

To fit your ratchet to SRAM shifters for hydraulic brakes, see the following video**:

To fit your ratchet to SRAM shifters for cable brakes, see the following video**:

NOTE: On some older shifters, the reach adjuster will not spin freely when it bottoms out. Stop turning the reach adjuster screw as soon as you encounter resistance.

To fit your cable fin to a SRAM Eagle* derailleur, see the following video**:

 

To fit your Rear Exit Cable Stop to a SRAM Eagle* derailleur, see the following guide**:

Rear Exit Cable Stop 01

* Ratio Technology Limited is not in any way affiliated with, sponsored or endorsed by SRAM, LLC.

AXS®, DoubleTap®, eTap®, SRAM®,SRAM APEX®, SRAM EAGLE®, SRAM FORCE®, SRAM RED®, SRAM RIVAL®, X0®, X01®, XX1® are registered trade marks owned by SRAM, LLC. Eagle™, Exact Actuation™, GX™, NX™, SRAM APEX 1™, SRAM Force 1™, SRAM RIVAL 1™, S-series™, SX™, WiFLi™, X-Actuation™,  XD™, XDR™, XPLR™, XX™, Zero Loss™ are trademarks of SRAM, LLC.

** Please note that modifying these components may void the original SRAM warranty.

Weight 100 g
Dimensions 17.5 × 11.2 × 2.2 cm
Packaging

To reduce waste we will send orders of over 10 units as bagged kits with one set of instructions rather than individual kit boxes. You can find a PDF of the instructions on our website here https://ratiotechnology.com/support/ . If you have ordered less than 10 kits but would also like to reduce the packaging of your bulk order or have any questions please email us at [email protected]. Equally if you would like the full packaging for orders of 10+ kits drop us a line too.

Large orders

If you wish to order more than 50 kits please contact us directly via [email protected]

HS code

HS8714995099

Country of origin

GB

3 reviews for 1×12 Wide Upgrade Kit – Rear Cable Exit

  1. Dominique Swinnen

    A couple of words after 250 km with the Ratio kit… What an upgrade! The combination of the SRAM Rival and the Eagle GX derailleur really made my gravel unique with a 500% range (1×12 speeds). No fear of any routes! If you have a minimum of tools, with the help of the tutorial, the installation is easy.

  2. Mark

    Incredible upgrade that is fast and easy to install. Really enjoy SRAM Rival 1×12 on my gravel bike.

  3. John

    Great kit and easy to fit . I watched the videos a couple off times first . All very straight forward and works perfectly on my 21 Stigmata

Add a review

Your email address will not be published. Required fields are marked *