Skip to content

Cable Spool

Use this aluminium cable spool as a SRAM 11 speed road shifter repair kit, or to fit a Ratio Upgrade Kit to your SRAM 10 speed road shifters.

This aluminium version is much more durable than the original plastic spool.

It’s always annoying when you can’t find the right spare part so, for the avoidance of doubt, the cable spool is also known as a ratchet wheel, ratchet ring or cable drum.

Please note that the cable spool is not required for newer models of 10 speed shifters; some of these shifters are already 11 speed compatible. For more information on compatibility and how to identify your shifter, check our guide.

View our Support page here.

£20.42

SKU: 0016 Category:

In combination with a Ratio 12 speed ratchet, the Ratio aluminium cable spool allows you to upgrade SRAM 10 speed road shifters to 12 speed. Additionally, the spool can be used as a replacement part to repair damaged or broken SRAM 11 speed road shifters.

  • Don’t scrap your 10 speed shifters – upgrade them to 12 speed with a Ratio aluminium spool
  • With a spool fitted, 10 speed shifters are also compatible with SRAM 11 speed ratchets
  • Replace a damaged 11 speed cable spool, repairing your broken 11 speed Red*, Force*, Rival* or Apex* shifter

Our cable spools are machined by us in the Lake District, UK.

Note: If you fit the Ratio aluminium cable spool to 10 speed shifters, you will be able to fit 11 or 12 speed ratchets. To re-fit the original 10 speed ratchet just replace the original cable spool.

In your kit you will find:

  1. Ratio aluminium cable spool
  2. M2.5 screw for shifter disassembly

To use the spool you will need:

  1. SRAM 10 or 11 speed road shifters from the Red*, Force*, Rival*, Apex* or S Series* groups.

All products we offer for sale on our website are Ratio Technology products unless stated otherwise. All third-party products, company names and logos remain the property of their respective holders and use of them does not imply any affiliation with or endorsement by them.

To fit your spool to SRAM shifters for hydraulic brakes, see the following video. When you remove the red-coloured SRAM spool, replace it with your new blue-coloured Ratio spool**:

 

To fit your spool to SRAM shifters for cable brakes, see the following video. When you remove the red-coloured (11 speed) or white-coloured (10 speed) SRAM spool, replace it with your new blue-coloured Ratio spool. Note that an 11 speed shifter is shown, but the process is very similar for 10 speed models**.

NOTE: On some older shifters, the reach adjuster will not spin freely when it bottoms out. Stop turning the reach adjuster screw as soon as you encounter resistance.

 

Please note that the cable spool is not required for newer models of 10 speed shifters; some of these shifters are already 11 speed compatible. For more information on compatibility and how to identify your shifter, check our guide.

View our Support page here.

* Ratio Technology Limited is not in any way affiliated with, sponsored or endorsed by SRAM, LLC.

AXS®, DoubleTap®, eTap®, SRAM®,SRAM APEX®, SRAM EAGLE®, SRAM FORCE®, SRAM RED®, SRAM RIVAL®, X0®, X01®, XX1® are registered trade marks owned by SRAM, LLC. Eagle™, Exact Actuation™, GX™, NX™, SRAM APEX 1™, SRAM Force 1™, SRAM RIVAL 1™, S-series™, SX™, WiFLi™, X-Actuation™,  XD™, XDR™, XPLR™, XX™, Zero Loss™ are trademarks of SRAM, LLC.

** Please note that modifying these components may void the original SRAM warranty.

Weight 20 g
Dimensions 17.5 × 11.2 × 2.2 cm
Packaging

To reduce waste we will send orders of over 10 units as bagged kits with one set of instructions rather than individual kit boxes. You can find a PDF of the instructions on our website here https://ratiotechnology.com/support/ . If you have ordered less than 10 kits but would also like to reduce the packaging of your bulk order or have any questions please email us at [email protected]. Equally if you would like the full packaging for orders of 10+ kits drop us a line too.

Large orders

If you wish to order more than 50 kits please contact us directly via [email protected]

HS Code

HS8714995099

Country of Origin

GB

1 review for Cable Spool

  1. Gabriel

    An excellent replacement for the damaged/worn OEM spool, this part extended the longevity of my shifter as opposed to replacing the entire unit per manufacturer reccomendation. #righttorepair

Add a review

Your email address will not be published. Required fields are marked *