Drop Bar Conversion for SRAM Eagle 70/90
The Ratio Drop Bar Conversion for SRAM Eagle 70/90 allows you to pair SRAM Apex 12 speed road shifters with an Eagle 70 or Eagle 90 Transmission derailleur and T-Type cassette*. It brings SRAM Transmission’s shifting-under-load performance to a mechanical drop bar drivetrain, making it an ideal solution for gravel and drop bar MTB builds. It’s also a perfect upgrade for a bike with a SRAM Apex XPLR drivetrain, increasing the range and improving the shifting.
This kit works with SRAM Apex 12 speed levers, which use SRAM’s X Actuation pull ratio. It is not compatible with 10 and 11 speed SRAM road levers, which use their Exact Actuation pull ratio.
The replacement link and fin are CNC machined from 6082 aluminium. The fin converts the cable actuation of the Eagle 70/90 derailleur to work with SRAM Apex 12 speed road shifters, while the rear exit cable stop provides clean cable routing for a wide range of gravel and MTB frames.
An integrated barrel adjuster allows you to fine-tune your indexing on the fly.
Mechanical SRAM Transmission for Drop Bars
SRAM Eagle 70 and Eagle 90* use SRAM’s T-Type pull ratio and are not natively compatible with mechanical SRAM road shifters. The Ratio conversion changes the derailleur’s cable pull ratio, allowing you to build a mechanical SRAM Transmission drop bar or gravel mullet drivetrain using Apex 12 speed levers.
In this kit you will find:
- Replacement link and fin CNC machined from 6082 aluminium
- Rear exit cable stop with barrel adjuster
Please note: derailleur is for illustrative purposes only – no derailleur is included with the kit.
To use this kit you will need:
- Frame with a UDH-compatible dropout
- SRAM Eagle 70 or Eagle 90 Transmission derailleur
- SRAM Apex 12 speed mechanical road shifters
- SRAM Eagle Transmission T-Type 12 speed cassette
- SRAM T-Type chain
Please note: this kit is not compatible with SRAM Exact Actuation* road shifters converted using a Ratio ratchet. See our Compatibility Page for details.
Installation
To fit your kit, see the installation video below.
* Ratio Technology Limited is not in any way affiliated with, sponsored or endorsed by SRAM, LLC.
AXS®, DoubleTap®, eTap®, SRAM®,SRAM APEX®, SRAM EAGLE®, SRAM FORCE®, SRAM RED®, SRAM RIVAL®, X0®, X01®, XX1® are registered trade marks owned by SRAM, LLC. Eagle™, Exact Actuation™, GX™, NX™, SRAM APEX 1™, SRAM Force 1™, SRAM RIVAL 1™, S-series™, SX™, WiFLi™, X-Actuation™, XD™, XDR™, XPLR™, XX™, Zero Loss™ are trademarks of SRAM, LLC.
















